Once you have added a cellular camera to your Strike Force Wireless account and placed it on your selected subscription it is time to get it running. The steps below will guide you through this process and ensure you have a good understanding of how your camera will function.
1. Perform the Cellular Test outlined here.
2. Adjust Upload Setting: Out of the box your Browning Trail Cameras Thumbnail Upload setting is set to 'By Schedule'. This means after the initial image(s) is transmitted via the Cellular Test the camera will take pictures and hold them until the preselected scheduled times to sync. To change this to immediately follow the steps below:
From the Cameras Tab press the Settings Cog to go to that camera's settings:
On the Cameras Settings page scroll to the 'Thumbnail Upload' setting, open the drop menu, select 'Immediately' and press 'SAVE CHANGES'.
While on the cameras settings page you can make changes to any other settings you wish as well.
IMPORTANT NOTE: Because your camera was set to 'By Schedule' out of the box the changes that you make to the settings, including changing to 'Immediately' will not go into effect until the next Scheduled Sync.
3. You are ready to place your camera and enjoy the images it returns via the Strike Force Wireless app. Pro Tip: If you are going to take your camera miles away from where you are we advise performing the cellular test at the location you plan to leave the camera to ensure adequate signal and operation.